The Properties and Applications of Molybdenum Steel

Properties of Molybdenum and Tungsten are very similar, the boiling point and the conductive performance is outstanding, the linear thermal expansion coefficient is small, easy processing of tungsten. Molybdenum is a kind of chemical element, chemical symbol is Mo, its atomic number is 42, is a kind of gray transition metal. Pure metal molybdenum is silvery white, very hard. Add a small amount of molybdenum to steel, hardened steel. Molybdenum is a very important nutrients to plants, were found in some of the enzyme. And Tungsten is a kind of steel grey or silver white metal, with high hardness and hard melting point. Its atomic number is 74, the atomic weight of it is 183.85. The melting point of it is 3410℃, the boiling point of it is 5900℃, thermal conductivity is 10 to 100 for 174 w/m*k. Slow evaporation at high temperature, the thermal expansion coefficient is very small, the expansion coefficient at 0 to 100 ℃, 4.5 × 10-6 · K-1. The resistance of tungsten is about 3 times larger than the resistance of copper.

lloy steel, stainless steel, tool steel and cast iron is the main field of application of Molybdenum, the Molybdenumproduction determines the demand, the effect of Molybdenum in the steel is as following:

1. To reduce the cooling rate to the appropriate values to obtain a hard martensite, which can improve the strength, hardness and toughness of a large section components.

2. Reduce the temper brittleness.

3. The resistance to hydrogen embrittlement.

4. The resistance to sulfide stress cracking.

5. Improve the high strength.

6. To improve the corrosion resistance of stainless steel, especially the anti chloride pitting.

7. To improve the high strength low alloy steel welding performance.

As steel Molybdenum alloy additives are the most important uses , according to statistics of 1986, which accounts for the total world consumption of 83% of Molybdenum. And where a steel containing Molybdenum World crude steel production has accounted for 1/10. Therefore, Molybdenum steel than is often used as an industrially developed country or one of the signs. 

Types of Silicone Rubber and Basic Features

Silicone Rubber products can run a large amount of electric power system, and this should thanks largely to its excellent water repellency, water repellency and stain-resistant flash capability. Current products on the market, mainly as the following three categories:

Room Temperature Vulacanized Silicone Rubber (RTV Silicone Rubber):

This kind of Silicone Rubber has excellent hydrophobic properties and contamination resistance properties, hardness is low, but because of the RTV, and various aspects of mechanical properties and resistance erosion ability is poor, aging is worse.

Room Temperature Vulacanized Silicone Rubber is with room temperature curing, good mobility, forming process is simple and can operate on the spot.

High Temperature Vulcanized Silicone Rubber (HTV Silicone Rubber):

This kind of Silicone Rubber has the resistance to aging, resistance to tracking and erosion, water repellent, stain proof, fire retardant, ozone resistant, UV resistant, dampness resistant, resistant to high and low temperature and tearing strength of character.

High Temperature Vulcanized Silicone Rubber is with 140 to 180℃ high temperature curing, poor mobility, special shapes or large equipment moulding process complex. Oxidant gas production and retained in the product, and mold corrosion.

Liquid Silicone Rubber (LSR):

This kind of Silicone Rubber is with all the advantages of High Temperature Vulcanized Silicone Rubber, it has excellent properties on technological properties of the proof tracking, high and low temperature resistance and hydrophobic properties and so on.

Liquid Silicone Rubber is with 90 to 140℃ curing, good flowability, components directly in the Silicone Rubber of Platinum catalysts, two-component mixed crosslinked, forming process is simple. Particularly suitable for external insulation of large equipment, and no damage to mould.

Molybdenum Dioxide And Molybdenum Trioxide

Molybdenum Dioxide, is a kind of brown-black powder with steel shiny purple. The density of Molybdenum Dioxide is 6.44 g/cm3, we can get Molybdenum when heat the Molybdenum Dioxide  with hydrogen the temperature is above 500℃. And generate Molybdenum Oxychloride reaction with chlorine, and hydrogen chloride, alkaline,acid reaction. And it is very slightly soluble in Sulfuric Acid, Nitric Acid and Silver Nitrate. Oxidation of Molybdenum Dioxide can get Molybdenum Trioxide. Can be made of metal Molybdenum in steam heating, or heating to 470 ℃ MoO3 in hydrogen reduction of. Used in producing Molybdenum and other Molybdenum compounds.

Molybdenum is a silver-white metallic powdered Molybdenum gloss black, the melting point of it is 2610℃, the boiling point of it is 5560℃, the density of it is 10.2g/cm3. Molybdenum is very stable at room temperature in air, when the temperature was raised to 600℃, quickly react with oxygen to produce the more volatile Molybdenum Trioxide. At 500 to 1150 ℃ reduction with hydrogen trioxide or Ammonium Molybdate , Molybdenum can be available. MoO3 molecular weight of 143.94. White transparent rhombic crystals, to yellow when heated, cooled and restore the original color. Density 4.692g/cm3, melting point 795 ℃, boiling point 1155 ℃, easy sublimation. Insoluble in water, can be melted in a solution of ammonia and alkali generated Molybdate. Dissolved in acid, Molybdenum Dioxide generated root (MoO22 +) and Molybdenum Oxide root (MoO4 +) complex cation to form a soluble complex with the acid group. Oxidizing very weak at high temperature may be hydrogen, carbon, aluminum reduction. Reagents for the analysis, Molybdenum and Molybdenum alloy salt preparation. Ignition or Molybdenum or Molybdenum Disulfide to obtain calcined in air Molybdate.

While the Molybdenum Dioxide is different from Molybdenum Trioxide, it has two oxygen atoms, Molybdenum Dioxide, brown black powder, with steel shiny purple. Oxidation of it is very weak, at high temperature can be hydrogen, carbon, aluminum reduction. Used as an analytical reagent, preparation of Molybdenum and Molybdenum salt. Burning Molybdenum or Molybdenum Disulfide in air or roasting Molybdenum prepared.

Polyvinyl Alchol PVA 1788 and PVA 1799

Architectural coatings commonly use Polyvinyl Alcohol PVA 1788 and PVA 1799. Polyvinyl Alcohol is derived from the hydrolysis of Polyvinyl Acetate, and can not derived by the polymerization of Vinyl Alcohol. Because Vinyl Alcohol is very unstable, there can be no free Vinyl Alcohol Monomer. The formula of Polyvinyl Alcohol is (CH2CH)OH, wherein the degree of hydrolysis and degree of polymerization has a great influence on the physical properties of Polyvinyl Alcohol. The polymerization degree of the Polyvinyl Alcohol can be divided into a high polymerization degree, medium polymerization degree and low degree of oligomerization, and recently, the development of an ultra-high degree of polymerization products.

There are three typically kinds of alcoholysis, namely, 78 %, 88 % and 98 %. The complete alcoholysis of Polyvinyl Alcohol is 98 % to 100 %, partial alcoholysis of alcoholysis typically is 87 % to 89 %. For convenience, we often fetching thousands of polymerization degree, rounded at the front, percentages in the back alcoholysis. Therefore, PVA 1788 means that polymerization is 1700, with diethylene glycol 88 %, PVA 1799 means that polymerization is 1700, with diethylene glycol 99 %.

PVA 1788 is with good water solubility, whether in cold water, was quickly dissolved in hot water, but PVA 1799 only dissolves in hot water at 95 ℃ or above. Due to Polyvinyl Alcohol PVA to neutral, at the time of dissolution does not need special corrosion requirements, but it’s best to use stainless steel or enamel reaction kettle, because these materials will not rust and contamination of the solution.

PolyvinylAlcohol PVA 1788 and PVA 1799 can be used for emulsion polymerization of Vinyl Acetate emulsion stabilizer. Polyvinyl Alcohol can be used in the manufacturing of water-soluble adhesives, and can be used as modification of starch adhesive agents. And also can be used to preparation of photosensitive adhesive and benzene class solvent resistant sealant. Polyvinyl Alcohol also can be used as release agents, dispersants and so on.

What is Sodium Ascorbate?

Sodium Ascorbate is a kind of white to yellowish white crystalline powder or granules, odorless, slightly salty flavor. The decomposition temperature of it is of 218 ℃, in the dry conditions are more stable, light color burn, after moisture absorption and slow oxidation and decomposition in aqueous solution. Sodium Ascorbate can be much easier to be soluble in water than Ascorbic Acid, 10 % aqueous solution PH is about 7.5.

First aid measures:

Ingestion: Do not induce vomiting. If the victim is conscious, instead of convulsions, give 1 or 2 glasses of water to dilute the chemicals, and to make a hospital or poison control center immediately.

Breath in: Leave the contaminated area immediately and take deep breath of fresh air. If the symptoms (such as wheezing, coughing, shortness of breath, or in the mouth, throat, or chest burning), call the doctor, and was prepared to transport victims to hospitals.

Skin: It can cause skin irritation. Symptoms may include redness and burning of the skin and other skin damage. Gently and thoroughly wash all affected skin areas with soap and water. If you develop symptoms such as redness or irritation, immediately call a doctor, and be prepared to transport the victim to a hospital for treatment.

Eyes: First check the victim of contact lenses, if present removed. While calling a hospital or poison control center for 20 to 30 minutes of water or saline solution flush eyes of the victims. Do not put any ointments, oils, or medication in the victim 's eyes, the doctor did not specify. If symptoms ( such as redness or irritation ) development, please transported the victim to a hospital immediately.

The stability of Sodium Ascorbate:

Aqueous solution is unstable, and the air is greater than pH 6.0 by the relative stability when exposed to rapid oxidation of Ascorbic Acid gradually darken light it is exposed to light in the air is gradually dimmed, but not damage, slight coloration therapeutic activity Ascorbic acid injection. Solution of Ascorbic Acid is rapidly oxidized in the air, the drug in an alkaline medium should be protected, air and light. Ascorbic Acid at concentrations greater than 100 mg/ml may undergo decomposition and the production of carbon dioxide. Due to the increased pressure may develop after prolonged storage, carefully open the ampoule containing Ascorbic Acid injection.

The application of Vanadate

Vanadate is a general term for the pentavalent Vanadium oxy acid salts. It is similar to the situation of phosphate. Vanadate from solution crystallization, Vanadate ions sometimes has a structure similar to the solution, sometimes also have some changes, such as partial Vanadate VO in solution to form V3O ion triangle. In the anhydrous potassium Vanadate is formed by VO4 tetrahedra is an infinite chain structure unit. When there are other ions in solution, such as oxygen radical containing silicon, phosphorus, arsenic, tin, molybdenum, tungsten, vanadium ion VO can also become the corresponding heteropoly acid and their condensation. As with the Vanadium Pentoxide, vanadium acid salt can also be used as catalyst for oxidation reaction. Dissolved Vanadium Pentoxide in the concentrated solution of Sodium Hydroxide, Sodium Vanadate solution can be obtained which is colorless, Vanadium in Vanadate VO from. In aqueous solution,with the increase of the acidity of the solution, Vanadate in different degree of condensation and the formation of multi anion different.

Vanadate can be used as a chemical reagent and catalysts, mordant as well as manufacture of Vanadium Pentoxide or vanadium, iron and other raw materials. Vanadate pigments not only color and decoration, with increased strength, corrosion-resistant coating, light, weather and other special properties, such as temperature indicating paint to indicate that the surface temperature.

The development and application of vanadium bismuth yellow pigment in foreign countries is quite active, attract people's attention. Using Ammonium Vanadate pigment in black leather and ink dye, durable and non corrosive nib. In order to YVO4 europium activated for imaging, color TV tube.

Vanadate also has some applications in glass and ceramic industrial, such as:

Vanadate can be made of a variety of colored glass, with semiconductor properties of glass, utraviolet radiation absorbing glass, porcelain like coating color enamel and so on. Vanadate also developed for photosensitive agent and colorant, in photography and film industry.

What is Polyvinyl Alcohol Resin?

Polyvinyl Alcohol Resin products is white solid, the appearance can be divided into three kinds: flocculent, granular and powder. PVA Resin is non-toxic, tasteless, non-polluting, and can be dissolve in water at the temperature of 80 to 90 ℃. The aqueous solution of Polyvinyl Alcohol Resin has good adhesion and film forming properties, it has resistant to oil, lubricants and most organic solvents such as hydrocarbons. Polyvinyl Alcohol PVA has the properties of long-chain polyol esters, ethers, acetals and other chemical properties.

At the same time of preparation of aqueous solutions, this product is not bubbling, but in high concentration, speed faster and also produce small amounts of foam in order to contain the bubble, we should add defoamer: 0.01-0.05% (PVA as a benchmark) octanol, phosphoric acid tributyl ester or 0.2-0.5% (PVA as a benchmark) silicone emulsion.

Anti-corrosion: If the Polyvinyl AlcoholResin has been long-term storage, the water in aqueous solution will have a corruption, but it does not affect the performance of this product. At this point, we should add 0.01-0.05% (PVA as a benchmark) of formaldehyde, salicylic acid or other preservatives.

Rust prevention: Storage in tools, you should add traces of weak bases, should be added when meat is used 0.02-0.05% (PVA as a benchmark) of sodium nitrite, the best use of stainless steel, plastic containers.

And the Polyvinyl Alcohol Resin should be stored in ventilated, cool and dry place, away from sources of ignition. And should handle with care during transport, and prevent damage to the packaging.

Polyvinyl acetate emulsion (PVAC) is mainly based on vinyl acetate monomer, polymer, commonly known as the white LaTeX. The latex-free environment, the price is cheap, easy to use, are porous materials such as wood, paper, fiber adhesive ideal for. It is widely used in printing, bonding, wood construction, leather, tobacco processing, paper processing, fiber composite, aluminum foil paper, Emery cloth, sand paper adhesive industry, can also be used for insulating plates for interior wall paint, steel processing and so on.